Sliding gate model B.ALU VARO

Sliding gate model B.ALU VARO


Width: up to 10 m cantilevered
Height: up to 2.5 m


The B.ALU VARO sliding aluminum gates are created using first-class workmanship. Because of its “modular” system this type of gate combines rapid delivery readiness, safety, flexability, economy and comfort. Fundamental parts are combined with each other to allow different gate lengths to become possible with just a few individual parts and in a short space of time. This reduces storage costs and provides immediate availability. At the same time the costs for the transport are reduced because of smaller individual components, and there is no need for any special handling equipment or lifting platforms for the installation.

The structure is assembled on-site by plug and screw connections and no specialist tools are required.

The cantilever B.ALU-VARO sliding gates are available in a variety of modular units, and a spike bar provides additional security on request. With the well-established integrated drive unit each B.ALU VARO sliding gate almost “floats” silently.
The two roller devices are mounted on the running in portals and are adjustable in height by clamping plates; this simplifies the ease of installation and provides additional stability. The clamp on the upper roller guide is also adjustable on the portal.

The drive and control components are set on an external drive console, and the rack is integrated in the lower profile. Manual gates are supplied with a special sliding gate lock.
There is an option of automation with 24 V technologies available.

The filling of the B.ALU-VARO sliding gates can be chosen between round bars DM 25 mm or square bars 30/30 mm in 4 standard colours. All cover and fittings (except screws) are powder-coated in anthracite. The easy-care, scratch-proof and weather resistant powder coating of the sliding gates is applied in house and keeps its flawless appearance for many years.




Technical details:


Industrial sliding gate in screwed, modular construction

Self-supporting running rail HST 31 (200 x 300 mm) Upper profile HST 33 (80 x 60 mm)




Leave a Reply

Your e-mail address will not be published. Required fields are marked *