All swing gate drives are either prepared for on-site installation or pre-wired and partly build on.

Drive model B.ALU CB1 / 2 – build on drive

24 V technology for single and double leaf swing gates from 2 to 7 m width (double-leaf up to 14 m)


The electromechanical spindle drive is extremely reliable. The inside running spindle and the internal parts are mounted so as to be protected from weather influences, which extends the service intervals.
The user friendly control system is built into an attractively designed and functional weatherproof casing.
The connection of the motor to the control system is made with a three wire technology. The gate movements are constantly controlled with encoder technology, which guarantees an ideal controlling of the soft phases.
Connections for photocells, a flashing light and various command devices are standard.
On request, this drive system is also available with an emergency battery backup in case of power failure.
Aufbauantrieb CB1 (2)

Drive model B.ALU CB2 / 2 – underfloor drive

Discreet underfloor drive in 230 V technology for single and double leaf swing gates up to 3.5 m width (double-leaf up to 7 m)


The electromechanical gear drive works extremely reliably and is almost “invisible” in a
mounting box installed in the ground. The underground operator works very reliably, without affecting the appearance of the gate.
The customer friendly control system is built into an attractively designed and functional weatherproof casing. The connection of the motor to the control system is made with a three wire technology.
Connections for photocells, flashing light and various command devices are standard.
CB2

 

 

 

 

colibri-drehtor

Leave a Reply

Your e-mail address will not be published. Required fields are marked *

*

NEHMEN SIE KONTAKT MIT UNS AUF!